how to use vibe + drop® + cone

Our vibrators will arrive in travel mode. Press and hold the button for 3 seconds. drop will send out two quick high-speed vibrations as a confirmation. When locked, it cannot be turned on accidentally. To unlock, hold the button again for 3 seconds.

vibe
We recommend plugging directly into a wall outlet with a USB adapter (versus plugging into a device's USB port, like a computer). The tip of the device needs to be fully inserted for the vibe to charge.

It takes two hours for the vibe to fully charge. The light should turn on when your vibe is charging and turn off when complete.

The vibe runs on a lithium-ion battery, so there will be battery drainage over time. We recommend charging your vibe after every use for optimal life span. If the battery drains completely, the vibe will no longer work and cannot be charged.

Charging time: 1.5–2 hours

Run time: 1–1.5hours (highest speed)/1.5-2 hours (lowest speed)

drop
We recommend plugging directly into a wall outlet with a USB adapter (versus plugging into a device's USB port, like a computer). The tip of the device needs to be fully inserted for the drop to charge. 

It takes two hours for the drop to fully charge. 

The light should fade in and out when your drop is charging and will shine brightly when complete.

The drop runs on a lithium-ion battery, so there will be battery drainage over time. We recommend charging your drop after every use for optimal life span. If the battery drains completely, the device will no longer work and cannot be charged. 

Charging time: 1.5–2 hours 

Run time: 1–1.5hours (highest speed)/1.5-2 hours (lowest speed)

cone
Whether solo or with a partner, the tapered end can be fully inserted into the anus, stopping at the flared base. 

We strongly suggest using an aloe- or water-based lubricant when inserting cone for ease and comfort, reapplying as needed.

To remove, relax and slowly pull while gripping the flared base—using more lubricant. Be sure to clean thoroughly after use.